MOSCONI A CLASS

莫斯科尼A类放大器是汽车音响市场上最杰出的放大器之一。有意识地在这里摒弃了一种丰富的设备，以便在信号通路中产生无干扰因素。因此，音乐信号完全不加改变地传递到扬声器上是可能的。输出功率高达30瓦，放大器工作在纯A类模式。简而言之，这意味着放大器晶体管提供更高的基极电流，以避免传输失真。只有在30瓦以上，放大器才能切换回A/B操作，从而提供高功率。此外，单独的“双单声道设计”可以实现完美的通道分离。

非常特殊的动态a级电路结合了最佳的功率效率和出色的声学性能、完全互补的解决方案和功率bjt提供了卓越的声音体验、双单声道和SMD技术、零负反馈，避免任何形式的互调失真、直接驱动能力，实现最短的信号路径、a级按需电路技术确保始终选择最佳输出晶体管工作点以满足a级要求、平滑谐波电源削波控制电路避免了当信号接近电源电压时输出级的急剧饱和、强制冷却(温控风扇)、银色缎面处理、尺寸:450 × 250 × 50毫米、重量:5,3 kg。

OVERVIEW MOSCONI A CLASS

The Mosconi A Class amplifier is one of the most outstanding amplifiers on the car audio market. Consciously here was renounced a rich equipment, in order to generate no interference factors in the signal path. Thus it is possible that the music signal is passed on to the loudspeakers absolutely unaltered.

Up to 30 Watts output power, the amplifier operates in pure Class A mode. In simplified terms, this means that the amplifier transistors are supplied with a higher base current in order to avoid transfer distortion.

Only above 30 Watts does the amplifier switch back to A/B operation and can thus provide high power. Further, a separate "dual mono design" allows perfect channel separation.

·The very special dynamic A-Class circuitry combines the best power efficiency with excellent acoustic performance

·Full complementary solutions and power BJTs provide an exceptional sound experience

·Dual Mono & SMD technology

·Zero negative feedback to avoid any kind of intermodulation distortion

·Direct drive capability to achieve the shortest signal path

·A-Class on demand circuit technology ensures that the best output transistor operating point is always selected to meet A-Class requirements

·Smooth harmonics power clipping controlled circuitry avoids sharp saturation of the output stages when the signal is close to the supply voltage

·Forced cooling (temperature controlled fan)

·Silver satin finish

·Dimensions: 450 x 250 x 50 mm

·Weight: 5,3 kg

TECHNICAL DATA MOSCONI A CLASS

Output power @ 4Ω:2 x 100 Watts

Output power @ 2Ω:2 x 200 Watts

Input sensitivity:0,2 V - 5 V

AB Transition area:30 Watts RMS

Dimensions:450 x 250 x 50 mm

Weight:5,3 kg

DOWNLOAD